The main focus on our 'Machine build'  is durability, the working environment, daily maintenance and the ease of  cleaning.

The engines we use are either, Honda or Briggs & Stratton, and they are 25/35% stronger than other engines used in our competitors kerbing machines. The energy goes direct from the engine into the gearbox, this way you save power and;  It has less moving parts to go wrong!.

The engines, 5.5hp and the 6,5 hp, have been  'tested' in our machines by both Honda and Briggs & Stratton, they believe we use only 2/3 hp of power! - Therefore they should last for a very long time. The gearing is 'bespoke'. Made so the engine can run at a low rpm - this means less noise whilst your working! 

When we build the ScandiCurber we are aware, and take into account the tough, stringent CE regulations, whilst not forgetting the environment we will be working in, and the people using them!.

Therefore we have the handles in the correct position. They are adjustable, and suitable for both the  'tall and small'. 

ScandiCurb machines are very easy to clean, the oil can be changed with minimal fuss... and the moulds and Plungers are easily changed without tools! 

Our ScandiCurber is ideal for you to undertake all types of jobs; small private, to large commercial projects. There is no reason to incur extra expense on two machines when one will do. Our machines are robust enough to tackle the meanest of jobs, whilst versatile for the ornate residential kerbs. Our system is built for both!

It is the same with all our machinery - They are built to last. Our machines come ready for work, and can be operated either by one or two people.  The 'extra one man operation handles' come as part of our kit and not an 'Added extra'.

The picture below is of a job we did in Sweden 4 year ago -  14 workdays approx 300 mixes - 800 meters of different sized kerbs  - and our kerbers are still using the same mixer and ScandiCurb machinery today - which is still going strong!

Fuel:  Garden curbing. 140 meters of kerb uses approx. 0.9 litter of fuel.

Cleaning: We spray 'oil' on the machines inside and out, and use sandpaper inside the hopper. This way you will always have a clean kerbing machine - free of concrete and ready for the next job.

• 1 ScandiEdger with 5.5 hp. Honda or 6.5 B&S engine
• 3 moulds + all the hand tools you need
• Mower edge
• Slant edge
• 10 x 15 Kerb
• 1 bag of fibreglass
• 1 day training seminar
• 1 ScandiEdger with 9 hp. Honda Engine (or a turf cutter)
• 1 ScandiMixer with 8 hp. Honda Engine 265l/10qf

• 1 ScandiEdger with 5.5 hp. Honda or 6.5 B&S engine
• 5 moulds + all the hand tools
• Mower edge
• Slant edge
• 10 x 15 Kerb
• 15 x 15 Kerb
• 20 x 20 Kerb
• 3 pattern rollers
• 1 bag of fibreglass
• 1 day training seminar
• 1 ScandiEdger with 9 hp. Honda Engine (or a turf cutter)
• 1 ScandiMixer with 8 hp. Honda Engine 265l/10qf
  
  

Kerbing prices in Denmark:

We can make the 'kerb mould' that will be demanded by your customer!

We are currently testing a special mould for repairing / filling of cracks and pot holes in asphalt.

We fill the trench with compressed asphalt - fast and easy!

With our round 3,5 cm high 'wheelcurb' it is used to help drain water from the road. The kerb is round, and makes the road less dangerous for cyclists / bicycles.